A world-leading manufacturer of jet engines together with its equipment supplier required a general visual inspection of metallic supports in one of their test facility. A jet engine test cell is essentially composed of three sections: the air inlet stack, several stories high; a large central room where the jet engine is tested; and the air outlet stack, also several stories high. To stabilize the airflow and reduce the noise level, silencers are placed at a height of approximately 15 meters, both at the inlet and the outlet stack, in a staggered manner. Control vanes are also installed at the bottom of the inlet stack to control the air flow. The presence of those vanes represents a significant obstacle to easily access the silencers; traditional inspection methods may require a complete disassembly of this structure; a process which would typically take several days if not weeks. Cranes or ropes are then mandatory to reach the silencers, resulting in high costs and long downtimes.
The major concern for the operators of this type of construction is the risk of having any debris, bolt or nut being sucked in by the engine during testing. This may cause serious damages to the latter and the test facility itself. Additionally, the resulting downtime would have a huge financial impact, especially during the final quality checks of a production batch.
With these critical issues in mind, and no time and cost efficient solution, Elios seemed to be a good alternative for the jet engine manufacturer.
The inspection took place in one of the test cells of the world-leading manufacturer and was performed by a dedicated and experienced Flyability pilot. Flyability was appointed to fly through the control vanes and check the structural integrity of the metallic brackets holding the silencers together.
Ten flights of 10 minutes each were carried out for the inspection in various parts of the facility. Most of the flights were performed beyond line of sight (BLOS) with the camera looking at 90° up. The inspection could easily be carried by Elios with its ability to navigate around unknown, complex and very reduces spaces.
All the key elements were inspected in less than 4 hours at the cost of only one drone operator. The test cell was quickly back to operation after the inspection, allowing for an optimized maintenance operation minimizing downtime and an increase of quality assurance. The customer and its supplier were very pleased with the collected high-definition footage. Elios revolutions the industrial inspection market as well in the aeronautic industry by allowing access to inaccessible places.