Indoor remote radiation detection and mapping
Quickly deploy Elios 2 RAD from a convenient area to better understand radiological conditions.
When planning interventions, estimate the total dose workers would be exposed to and identify hot-spots to minimize human exposure.
Evaluate how much personnel dose exposure was avoided over time by leveraging Elios 2 RAD’s cumulative dose measurement.
|High-Level Radiation Detector||*Mid-Level Radiation Detector||*Low-Level Radiation Detector|
|Sensor technology||Energy compensated Geiger-Muller detector|
|Sensitivity||0.006 cps/uSv/h||1 cps/uSv/h||2.6 cps/uSv/h|
|Dose rate range||1.5mSv/h - 10Sv/h, 150mRem/h - 1000Rem/h||8uSv/h - 1Sv/h, 800uRem/h - 100Rem/h||3uSv/h - 10mSv/h, 300uRem/h - 1Rem/h|
|Type of radiation||Gamma, X-rays|
|Response frequency||1s to 2s|
In-flight dose reading through piloting app
Post-flight dose reading and localization
Sv or Rem
20 keV - 7 MeV
Detachable sensor with 100cm long cable to fit in Shepherd source for calibration.
*Availability Q1 2022.
The ability to calibrate the dosimeter is essential to gathering actionable data. To calibrate the sensor, plug it into a computer using a USB cable and place the sensor in your calibration device. The software displays the dose read by the dosimeter, and this reading can be edited to the appropriate dose in order to calibrate the sensor.
The dose and dose rate are displayed as a live measurement on the piloting application with a sampling rate of 2 seconds. A histogram from the last minute of measurement is also available with an indication of the maximum threshold.
Select between Rem and Sv units, get the instantaneous reading of the sensor, the cumulative dose for the flight, and the lifetime cumulative dose.
The Elios 2 RAD package contains everything you need to perform radiation sensing and mapping at your plant. Here is the list of items:
- Elios 2 Premium Package (see Elios 2 offering for more details)
- A High dose-range radiation detector
- A Mid dose-range radiation detector
- A Low dose-range radiation detector
- A 3-year inspector license to process, map, and your radiological data.
- A 3rd party software to calibrate the sensors
- Online training. material
In order to cover as many use cases as possible, the Elios 2 RAD is delivered with a set of three sensors. Each sensor covers a different range of radiation intensity so you can address any radiation protection tasks.
Inspector 3.0 is the software used to process and map the radiological data collected with the Elios 2 RAD. Inspector 3.0 licenses are bound to the hardware. So, when sharing data with your colleagues they just need to install Inspector 3.0 on their computer and they will be able to immediately open the data and visualize it without having to install or activate any license.
The Elios 2 RAD comes standard with all three detectors to make sure all of your use cases are covered. Each detector has a different range and the ability to use them interchangeably.