All Elios 1 systems running Avionics Firmware 1.1 or higher and Cockpit 1.1 or higher are capable of automatically upgrading provided that the tablet has access to the internet. Upon starting the Cockpit app, a notification will appear to inform you that a new version is available. Follow the instructions to install the new version of the App. The avionics firmware of the drone can be upgraded "over the air" if the ground controller and drone are also connected and powered on.
If you do not wish to connect your tablet to the internet, or if you are running firmware prior to V1.1, then the application and firmware can be upgraded offline through the process described below:
If your country or company does not allow Youtube access, please click here to view the instruction videos.
Download the Camera Firmware Binaries
Make sure that the drone is not powered
Remove the Camera SD card from your drone and plug it to your computer
Copy the "FTWLC1.bin" into the Cam SD card's root
Plug the CAM SD card back in the drone
Power up thedrone by plugging in a battery
The CAM LED status will blink blue for a moment and then become solid green
Unplug the battery
Note: Works only with Avionics v1.0.2 or higher