Fly without time constraints
The Elios 3 tether unit delivers continuous power for long, stress-free operations. By connecting to a wall outlet, generator, or compatible portable power station, it converts 100–240 V AC into high-voltage DC, delivered to the drone through a 50 m (164 ft) Kevlar®-reinforced cable. With steady power from the ground, pilots can eliminate mid-mission battery changes and stay focused on the inspection.
Full mission focus
Removes flight-time constraints, allowing the pilot to focus entirely on the mission.
Uninterrupted efficiency
No battery charging or swaps. Pilots stay on task, maximizing mission output.
Anti-Flip Swivel
Fly as freely as if untethered
Building on Flyability's proven collision-tolerant know-how, the anti-flip swivel secures the cable while allowing it to move freely around the drone, eliminating disturbances from the tether. This ensures perfect stability, even during sharp maneuvers or a cable snag.
The swivel rotates 360° around the drone, allowing the tether to attach from any direction. This rotation removes directional constraints, ensuring inspections are never limited by tether orientation.
Easy Tether-to-Battery Swap
Easily switch from tethered to
untethered flight
The air unit connects the cable to the drone and can be swapped with an Elios 3 battery in seconds. This lets pilots fly beyond the tether’s reach, ensuring complete data collection in all conditions.
Easy Tether-to-Battery Swap
Easily switch from tethered to
untethered flight
The air unit connects the cable to the drone and can be swapped with an Elios 3 battery in seconds. This lets pilots fly beyond the tether’s reach, ensuring complete data collection in all conditions.
Kevlar-Reinforced
Tether Cable
Rugged cable for demanding missions
The 50 m (164 ft) tether cable is made from lightweight, high-strength Kevlar® fiber, offering exceptional durability and a tensile strength of up to 50 kg. Its robust construction ensures reliable performance and resistance to wear, even in demanding operational environments.


Backup Battery
Land safely in unexpected power outages
The tether ground power unit is equipped with a backup battery either Elios 3 standard or high-capacity battery that automatically supplies enough power for a safe, controlled landing during unexpected power loss.
Backup Battery
Land safely in unexpected power outages
The tether ground power unit is equipped with a backup battery either Elios 3 standard or high-capacity battery that automatically supplies enough power for a safe, controlled landing during unexpected power loss.


Worldwide Power
Compatibility
Plug in Anywhere in the World
Supports 100–240 V AC input, making it compatible with most power outlets worldwide.
EU C5
Classified
Unlock new mission possibilities
Elios 3 tethered is compliant with the C5 class marking under EU regulations, enabling STS-01 operations in populated environments.
Get up close with the Elios 3 Power
Tether Unit
Case Studies
FAQ
How do I switch between tethered and untethered flight?
Can the tether unit be powered from a generator or portable power station?
Yes. The tether can operate from a standard outlet, a portable generator, or a power station, provided the source meets the system’s power requirements. Please refer to the technical specifications for details.
What happens if power is lost during flight?
If external power (e.g., mains or generator) is interrupted, the backup battery integrated into the ground unit automatically takes over, providing sufficient time for a safe and controlled landing
Can I travel with the tether?
Yes. The tether system can be transported like other drone equipment. The ground unit itself does not contain a battery, making it fully compliant for air travel under airline and IATA regulations. However, to function, the tether requires a backup battery (either an Elios 3 standard or high-capacity battery). The standard battery is below the 100 Wh limit and generally accepted for air travel, while the high-capacity battery exceeds 100 Wh and is subject to airline and IATA restrictions.
How can I make the tether work with my Elios 3?
Installation is quick and requires no permanent modification to the drone. Mount two small brackets on the Elios 3 cage, attach the drone mount with two manual screws, insert the air unit into the battery holder, and power up the tether. The full setup takes only a few minutes.
What are the system’s power requirements?
The tether runs on standard 100–240 V AC outlets worldwide, typically drawing 10 A at 230 V or 20 A at 120 V. For field use, a ≥2.5 kVA generator or a suitable portable power station is required. Please refer to the technical specifications for more details.