A Complete Guide to Corrosion Monitoring

What is corrosion monitoring and why is it important? Read this guide to learn all about corrosion monitoring, including ways that drones can help.

 In any process-intensive industry that uses volatile materials, like Oil & Gas or Petrochemicals, corrosion can be one of the biggest threats to the longevity of assets.

Without proper monitoring, big industrial containers like boilers or pressure vessels can slowly wear down due to corrosion, causing leaks or failures and contributing to poor performance and reliability. In extreme cases, if corrosion is left unmonitored it can lead to the all-out failure of an asset, and even explosions, posing safety risks to personnel, huge equipment costs, and subsequent environmental damage.


How big are the costs of corrosion? In the U.S. alone it has been estimated that the total annual cost of carbon steel corrosion is a staggering $276 billion.

And this is why corrosion monitoring is so important—because it helps mitigate these expenses by monitoring the degradation of an asset, allowing problems to be addressed before they reach a critical point.

In this article we’re going to take a deep dive into corrosion monitoring, with detailed information on what it is, why it’s important, and how it’s done. We’ll also cover tools that are currently being used for corrosion monitoring, with a special focus on ways that drones can help. 

Here are jump-down links to each section in this article in case you’d like to skip around:

What Is Corrosion Monitoring?

Corrosion is the gradual destruction of a material (usually metals) caused by interacting with chemicals, electrochemical reactions, friction, or some other environmental factor.

Monitoring is observing and checking the progress or quality of something over a period of time.

So, put simply, corrosion monitoring is the tracking of the gradual destruction of materials over time.

Corrosion often first appears as a discontinuity in a material, such as a discoloration or some other change to its appearance. 

This means that what you’re looking for when you set out to find corrosion are any irregularities in the wall or other surfaces that might reveal the existence of corrosion. 

If part of an asset, such as a wall or floor, is found to have corrosion, it’s important to begin monitoring its growth so that you can understand how it is changing over time, and have the data needed to recommend maintenance work as appropriate in order to mitigate the damage.

Monitoring vs. Inspecting

Monitoring can happen at the same time as inspecting but the two activities are different.

  • Monitoring focuses on a specific area of an asset and generally happens more often than inspecting
  • Inspecting focuses on the entire asset and generally happens less often than monitoring

When the word monitoring is used in the context of talking about the maintenance of an industrial asset, like a boiler or pressure vessel, it is referring to regular data collection to track changes in a particular area or areas of an asset over time. 

In comparison, an inspection refers to a full review of the entire asset, without a specific area in mind. An inspection may reveal corrosion, which will then lead to a recommendation that the corroded areas be monitored.

In addition to focusing on a specific area instead of the whole asset, monitoring generally happens more regularly than inspecting. 

While the laws in most countries only require inspections every 3-5 years (depending on the type of asset) monitoring might happen once every quarter if a certain area of an asset appears to be degrading at an increasing rate. For example, if the growth of corrosion on a specific section of a boiler wall seems to be increasing rapidly, quarterly monitoring might be changed to monthly monitoring to make sure the corrosion is being carefully tracked.

If corrosion continues, monitoring may eventually lead to a recommendation that work be done to correct the degradation.


What Exactly Do You Monitor in Corrosion Monitoring?

What you’re looking for when conducting corrosion monitoring is to track the growth of corrosion that has previously been identified.

Tracking the growth of corrosion can be done by using a measuring tool, by taking photographs, by creating an accurate 3D map of the area, or by doing some mixture of these three.

Here’s a list of assets in which corrosion is commonly monitored:

  • Vessels
  • Boilers
  • Crude oil systems
  • Transportation pipelines
  • Water systems
  • Flowlines
  • Vacuum towers
  • Cooling systems

The Elios 2 is a drone created just for monitoring and inspections in confined spaces. Want to learn more about how it works? Watch a demo now.

Why Is Corrosion Monitoring Important?

There are three main reasons corrosion monitoring is important:

  • Safety
  • Cost reduction
  • Improved efficiency


Corrosion monitoring is important for any industry that uses assets that can degrade over time, but it’s especially important in industries that work with volatile materials, which could explode if not stored properly.

As equipment ages it can become more and more susceptible to corrosion, and less resistant to harsh conditions such as high pressures and temperatures. 

The goal of corrosion monitoring is to track potential problem areas in equipment so that accidents are avoided and personnel are kept safe.

Cost Reduction

If an asset like a boiler falls apart prematurely due to corrosion it can be incredibly expensive to replace. 

In process-intensive industries such as the Chemicals industry, where work is done in refineries or plants which require the use of large storage containers for potentially volatile substances, corrosion can present huge annual costs in terms of damaged equipment. 

Corrosion monitoring can help companies avoid these expenses by contributing to the longevity of equipment and assets.

Improved efficiency

In addition to helping prevent accidents and cut costs, corrosion monitoring can improve the efficiency of industrial operations by:

  • Extending the life of existing assets and of related operational equipment
  • Providing insights into the kinds of materials that are less likely to corrode for future asset purchasing
  • Contributing to the identification of cost-effective methods for remedying corrosion growth and related issues
  • Identifying conditions related to corrosion in the operating environment—either that contribute to corrosion or that seem to mitigate corrosion—which can then be used to inform purchasing and maintenance decisions
  • Helping to reduce facility shutdown time

How Do You Perform Corrosion Monitoring?

The most important information to collect during corrosion monitoring is: 

  • The location and extent of the corrosion
  • The rate of corrosion (i.e., how fast it is spreading over time)
  • The underlying cause(s) of the corrosion

The first step most inspectors take to collect this information is to start with a visual inspection and then proceed to more refined instruments, like using an ultrasonic tester to measure wall thickness, as needed.

Visual Inspection

To conduct a visual inspection of an asset with the goal of monitoring corrosion, inspectors scan the floor, sidewall, or other areas being monitored with their eyes, trying to determine whether:

  1. The existing corrosion (i.e., the corrosion that is being monitored) has grown 
  2. There are new areas with corrosion, as indicated by a discontinuity in the surface of the wall, floor, or ceiling

If the visual inspection indicates that corrosion is growing or that there is new corrosion present, inspectors may want to do a further review of the discontinuous areas with various kinds of non-destructive testing (NDT) tools to quantify the amount of corrosion that is present.

Ultrasonic Testing

One of the most common types of NDT tools used for corrosion monitoring, after a visual inspection has been done, is an ultrasonic tester. These testers use short ultrasonic pulse-waves to allow inspectors to measure the thickness of a corroded wall in order to quantify how much metal or other material may have been lost relative to the surrounding, uncorroded areas.

Although ultrasonic testing is most commonly used on steel and other metals, it can also be used on wood, concrete, and other composite materials.

In many cases, visual and ultrasonic data will be all that’s needed for sound corrosion monitoring. If these data indicate that the corrosion found is an acceptable amount according to site specifications, the inspector will make a note to continue monitoring the growth and thickness of the corrosion, and will not recommend any maintenance be performed at that time.

Other NDT Testing Methods Used in Corrosion Monitoring

In addition to visual and ultrasonic data, inspectors may choose to use other NDT tools to monitor corrosion.

Some of these testing methods include:

  • Radiographic testing—using electromagnetic radiation to examine the internal structure of a material.
  • Guided wave testing—using acoustic waves to detect corrosion. This method is ideal for pipelines and similar structures because it can measure corrosion over very long distances—even hundreds of meters, in certain instances—from a single location.
  • Magnetic flux leakage—using a powerful magnet to magnetize steel or other metal and then measuring where there are “leaks” in the magnetic field, indicating corrosion, pitting, or other damage to the metal.

“When deciding on which testing method, technique, or tool to use for corrosion monitoring, the most important thing to think about is the job itself, and what it requires. The more you know about what’s out there in terms of NDT tools and monitoring techniques, the more equipped you’ll be to make a choice that will preserve the longevity of the assets you’re in charge of monitoring.”

- Jason Acerbi, General Manager at MFE Rentals, "Your One Stop Inspection Source"

Corrosion Monitoring Techniques

There are several different techniques inspectors might employ when using these different NDT tools for corrosion monitoring.

Some of these techniques involve placing a piece of the material from the container being monitored into the same circumstances as the corroded material to observe how it changes, and others involve sending a probe made out of different materials into those circumstances to take readings on the conditions there. In both instances the techniques involve recording change over time in order to understand how corrosion might be taking place from one unit of time—whether it’s a day, a week, or a month—to the next.

Here are some of the most common corrosion monitoring techniques:

  • Creating visual records to track corrosion growth. Using a drone you can spot the presence of corrosion and map the information on blueprints, which can then be compared to future visual records to track the growth of corrosion over time.
  • Monitoring ultrasonic thickness. This is a common technique that uses an ultrasonic tester to scan a wall in order to measure its thickness.
  • Using probes to measure electrical resistance. Probes track changes in electrical resistance, which can be used to track metal loss over time. Probes can provide regular data about the rate of corrosion (monthly, weekly, daily—even hourly).
  • Using coupons. A “coupon” is a piece of material that matches the material in the asset being monitored. The coupon acts as a proxy for the wall or other area being monitored, presenting a fairly simple way to monitor corrosion in almost any scenario. To use this corrosion monitoring technique you place the corrosion coupon—also known as a “mass loss coupon”—into the asset for a predetermined amount of time and then, once removed, test it for type(s) of corrosion, rate of corrosion (if taking multiple readings), and amount of corrosion.

Here are a few less common corrosion monitoring techniques:

  • Monitoring biological growth. This technique identifies bacteria within an asset that feed on sulphate. These bacteria produce sulphuric acid (H2SO4), which is extremely corrosive, so their presence in an asset means that some amount of corrosion is highly likely.
  • Monitoring hydrogen penetration. Using probes, you can measure the quantity of hydrogen that dissolves into steel. In Oil & Gas, hydrogen is often a byproduct of many of the reactions that take place in Oil & Gas, and its presence can eventually result in the steel becoming brittle and cracking if left undetected and unmonitored.

Looking for more resources? We found this slide to be a helpful visualization of how to troubleshoot your approach to corrosion monitoring:


Image source

What Comes Next?

After inspectors collect visual or other data on the status of corrosion while conducting corrosion monitoring they may take the following steps:

  • Make a determination about whether the asset is fit for service
  • Review the inspection schedule and make determinations about the need for increased frequency or other changes
  • Develop recommendations to correct/remedy existing corrosion-related problems within the asset
  • Develop other strategies for preventing corrosion, both for the asset being monitored and for other similar assets on site
  • Make predictions about the remaining life of the asset

How Drones Can Help with Corrosion Monitoring

Drones can be incredibly helpful for recording visual information about corrosion. 

A good inspection drone can provide a high quality visual representation of an area being monitored for corrosion. They can also capture precise data on the location of the corrosion, which can be archived for future reference.

New drones made just for inspections in hard-to-reach places, like the Elios 2, allow inspectors to cover more area within an asset, whether it’s a relatively small area being captured with a single image or a large area being mapped using photogrammetry. In the case of the Elios 2, all the visual data captured is measurable and accurate to a high degree.

Accessing Hard to Reach Places

If inspectors are trying to monitor corrosion inside a tank using a Remote Visual Inspection (RVI) tool like a Pan-Tilt-Zoom (PTZ) camera, they’re limited to what they can shoot because the camera can only be dropped into the tank wherever there are access points. 

Also, while a PTZ camera allows for remote directional and zoom control, its zooming capabilities are limited and it has no measurement capabilities.

A drone like the Elios 2, on the other hand, can do measurements that have been found to be accurate to within just one centimeter of error for a 2.4 meter length.


Zooming vs. Being There

In addition to being able to access hard-to-reach places, the Elios 2 can solve the problem of needing to zoom in on an area by simply flying closer to it in order to get a clearer image.

Poor lighting can degrade the quality of visual data captured, and is another issue caused by the inability to get close enough to the area being photographed. 

The Elios 2 allows inspectors to overcome the problem of poor lighting by simply flying closer to the area, bringing the light source closer to allow for better image capture. The Elios 2 also has an oblique lighting feature, which allows inspectors to change the direction of the light source in order to provide depth and dimensionality, mimicking the actions inspectors might take with a flashlight in their hand to achieve similar results.


A video demonstrating the Elios 2’s oblique lighting

Creating an Accurate Visual Record

Another big benefit to using a drone for corrosion monitoring is that it can collect enough high quality visual data to create a visual record of the status of corrosion on a given day.


Even if inspectors can enter the container in which they are monitoring corrosion, the amount of visual coverage they might be able to get with a hand-held camera is not nearly as thorough as what a drone can capture.

In addition to providing an accurate record of corrosion-related changes over time, visual data collected by drone can help provide before/after documentation for maintenance to ensure that remediation efforts like adding a patch or a coat of material to a wall return it to its original condition.

3D Models

Current technology is still somewhat limited when it comes to creating 3D models of the interior of assets like boilers and tankers. Environmental factors like light, dust, and the visual features present in the asset can make it hard to collect enough visual data to create a full 3D model of its interior.

But it’s often possible to use visual data collected by drone to create partial 3D models, which can be helpful for understanding where corrosion is located within an asset. Also, a 3D model created by drone using photogrammetry can allow you to place markers within an asset indicating where corrosion is present. Using the model, you can then click into the still images of the specific locations where corrosion is being monitored in order to do a more in-depth review of the level of damage.


As technology improves, it’s likely that we’ll be able to create full, highly detailed 3D models of the interiors of assets. These models can serve as a visual record for monitoring corrosion in an asset, just as high quality still images and videos currently do.

Learn more about how the Elios 2 helps provide high quality visual data for indoor inspections.

Watch an online demonstation

Table of contents



    Wondering how Inspector 3.0 differs from other 3D modeling software? Read this article to find out.


    Drones present several benefits as a tool for remote visual data collection in mining operations—here is our list of the top 6.


    Wondering how indoor drones are being used in public safety? Here are three use cases from police officers and firefighters working in the field.

    Public Safety Food & Beverage Sewer Power Generation Chemicals Maritime Oil & Gas

    Companies are using indoor drones to significantly reduce injuries and fatalities during internal inspections. Here's how they're doing it.

    Public Safety Food & Beverage Sewer Power Generation Chemicals Maritime Oil & Gas

    Companies are using drones to realize 6 and 7 figure savings in inspections. Here's how they're doing it.


    Drones present several benefits as a tool for remote visual data collection in sewer inspection scenarios—here is our list of the top 8.


    Although 2020 was a difficult year—as it was for everyone—we managed to stay quite busy here at Flyability. Here is our list of highlights from the year.


    Drones present several benefits as a tool for remote visual data collection in NDT (Non-Destructive Testing) indoor inspection scenarios—here is our list […]

    Articles Operational Procedures

    For indoor inspections, drones can help eliminate hazards completely by replacing the need for an inspector to enter them. This places drones in the top […]

    Inspector Photogrammetry

    What if you could make a 3D map showing you exactly where a defect was located within an asset after an indoor drone inspection flight—and almost no […]

    infrastructure & utilities

    Drones provide several benefits for bridge inspections—here's our list of the top 6.


    How accurate is the 3D model I made using Elios 2 visual data? Read this article on photogrammetry and resolution to find out.


    Is ten minutes of flight time enough? Yes, it is, according to our customers—read this article to find out why.


    During these times of COVID-19, boilers are crucial for the continued operation of a variety of businesses.


    [Power Generation infographic] See how drones are helping companies in the Power Generation industry improve safety for their inspectors while […]


    2019 was a tipping point for the use of robotics in inspections, especially for indoor applications. Learn more about the progress made in indoor drone […]


    The data you can capture with a drone depends on its payload. Elios 2 carries an optical camera, a thermal camera, and a powerful lighting system.


    [Oil & Gas infographic] See how drones are helping companies in the Oil & Gas industry cut inspection costs while increasing the safety of workers by […]

    A study conducted by Boiler Room Consulting (BRC) found that Flyability’s collision-tolerant drones can help significantly reduce CO2 emissions from […]

    Products & Services Spotlight

    Discover our latest products and services update in this video. We have a lot to share with you!