Inspection Of Tanks In A Pulp And Paper Mill

Pulp, which is the raw material used in the manufacture of paper, is prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops or waste paper. At an industrial scale, this process is performed in large tanks that need recurrent inspections. Inspection? That sounds like Elios’ specialty.

Customer Needs

One of Europe’s leading manufacturer of pulp and paper possesses a large paper mill in the north of Poland. The plant counts more than 50 chemical tanks used for the production of pulp and paper. Every year, the company proceeds to a plant shutdown in order to perform a thorough inspection of all infrastructures. This operation includes the inspection of the 50 chemical tanks. Part of the method consists of a general visual inspection of the assets as well as an integrity check of the welding. To perform these inspections the company uses traditional methods such as the use of rope accesses and scaffoldings. Motivated by the potential gain relative to the rapidity of execution but as well the potential benefit of not having to send people inside the tanks to do the job, the company requested the intervention of Flyability, and its polish partner Inspectios, to perform a pilot project with Elios.

Solution And Process

For this pilot project, it was decided to limit the intervention to 2 tanks, each having a diameter of 6 meters for a height of 25 meters. The inspection was also limited to the inside part of the tanks. Prior to deploying Elios, the tanks had been properly cleaned and degassed. 3 flights of 10 minutes each were necessary to perform the complete inspection of one tank, making the overall inspection worth 60 minutes of flight. Elios was piloted by a Flyability employee who was supported by inspection engineers to help conduct the inspection according to their expectations. Between each flight, the team gathered in a meeting room to check the videos produced by Elios and debrief on the best way to proceed.

The 5 first flights were conducted from the inside of the tank giving time to the team to getting used to the technology and reaching the appropriate level of confidence to finally perform the last flight directly from the outside of the tank.

ndt-inspection-for-pulp-and-paper-industry-flyability-2

Part of the method consists of a general visual inspection of the assets as well as an integrity check of the welding

The ability of Elios to capture visuals with 0.2 mm / pixel resolution was highly appreciated by the company.

Results

All the point of interest were inspected over a very short period of time without having to expose anyone to risk. The quality of the images, the rapidity of the inspection and the substantial benefits of not having to do the job using rope access or scaffolding were all points that made the team that had requested the inspection extremely satisfied by the use of Elios.

Once the inspection was completed and while the whole team was debriefing, an interesting point was raised relatively to the possibility to provide quick a response for emergency cases. The team that had requested the inspection foresees Elios as a quick-to-deploy solution in the case of unexpected situations; for example when a problem is suspected or detected within a tank. Indeed, not having to fully clean the tank before proceeding to an inspection, with possibly some non-explosive gas remaining inside, would provide considerable time savings.

Table of contents

    SEE ALSO

    Sewer

    The Elios 3 was used to safely inspect and map structures on a canalized river with a high flow rate.

    General

    The Elios 3 was used for an emergency in Lyon where an underground drone was the only way to investigate a mysterious sinkhole.

    Cement

    See how InspecDrone used the Elios 3 to complete UT drone inspections at a cement plant to complete non-destructive testing of assets.

    Power Generation

    The Elios 3 UT flew inside the stack, cutting the need to affect insulation on the outside, producing accurate results that can be repeated for routine […]

    General

    TEXO were asked to map storage racks at a large sugar refinery, and used the Asset Management extension to merge several days’ worth of flights.

    General

    Meet the Asset Management software extension - ready to simplify how you view and manage your Elios 3 data during and after inspections.

    Sewer

    Pete Kelsey and a team of specialists used laser scanners and drones to scan the entirety of Alcatraz to help predict the future of the island.

    Maritime

    Hull inspections with the Elios 3 UT cut labor intensity, no longer requiring teams of 16+ people to mount scaffolding - send the drone instead, and a […]

    Construction

    Specialist digitization and inspection engineers Delta Scan used the Elios 3 in a rapid response to deal with a gas explosion on a street in central […]

    Sewer

    In Sydney, Australia, Metrocorp Technologies is using the Elios 3 for safe surveys in live sewers, stormwaters and other high risk confined space assets.

    Mining

    To guarantee the safety of their furnace and employees, UNICALCE SpA appointed WACO Srl and their Elios drone to inspect some rock detachments at their […]

    infrastructure & utilities

    In a massive project to help Brussels become a smart city, Brussels Mobility and several partners mapped 13 km of underground technical galleries.

    Power Generation

    A drone inspection for wind turbine blades can help avoid over $1 million in replacement costs by identifying faulty equipment early.

    Public Safety

    When every second counts, emergency response teams need to make the right decisions. The Elios drones are helping inform decision making in firefighting […]

    Power Generation

    An abandoned coal plant is being mapped for redevelopment, so surveying and inspection specialists TEXO used the Elios 3 to inspect the old buildings and […]

    Power Generation

    CLP Power supplies highly reliable electricity to over 80% of Hong Kong’s population. As maintaining safe and efficient operations of power generation is […]

    Mining

    A major inactive zinc mine survey with the Elios 3 proved to have successful results and empowered surveys of old workings.

    Power Generation

    The Taltson Hydro Plant was due for maintenance work, and Osprey Integrity used the Elios 3 to inspect the inner workings of this dam.

    Mining

    See how the new Surveying Payload completed surveys faster and more easily at the underground mine ICL Boulby

    Cement

    The Elios 3 was used to cut risks and inspection times for stockpile surveys - while improving the accuracy of data. This is how.